3D Portable 20w 30w 50w 100W fiber laser marking machine for 3D Surface engraving and relief engraving

Application Scenarios：

Portable 3D laser marking machine is suitable for a variety of marking scenarios:

Large format marking, deep engraving, embossing, cleaning, mold texture, surface treatment, curved surface marking.

Parameters：

Features：

1. 3D dynamic focus for marking curved or irregular surfaces

2. Large marking area with spot diameter

3. Deep engraving, 3D engraving is widely used in mold processing

4. Dual-drive Z-axis dynamic module design, response frequency ≥10@±10°

Core configuration：

1. Galvo Scanner

-Unique optical path design with low optical loss;

-Smallest laser spot diameter for quality marking ;

-Japan made THK guide rails for dynamic system US made II-VI optic mirrors.

2. Control system:

Genuine Lenmark-3Ds operating system, can be simple and fast operation fast and easy to operate. Support expansion of 3D scanning equipment.

Optional spare parts:

	Rotary Axis for ring We also have other rotary axis of different specifications, Please let us to know if you need
	2D working table used to make micro move on XY axis
	Rotary working table, There is a circle of card slots on the back of the disc for placing pens. Realize fast engraving on the pen.
	Fixture, Support for metal sheets
	Goggle for 1064nm protection quality

Standard Accessories：

Each machine comes with the following parts

1. Inner Hexagon

2. Foot Switch

3. Power Cable

4. USB Flash Drive(We will store in it the software of the control system and the instructions for using the product for your better use.)

5. Goggles(We will give you high quality protective glasses for free.)

6. 60CM Ruler

7. Laser Inspect Report(Before each machine is shipped, we conduct machine tests to ensure the quality of our products.)

Foam cotton and wooden box packing:

3 layers packages .

For the outside, we adopt wood craft case .

In the middle ,the machine is covered by foam, to protect the machine from shaking.

For the inside layer , the machine is covered by thickening plastic bags for waterproof.

Our Services:

Pre-sale service：

We arrange final test before shipment. We run the machine without materials for a few days, and then mark materials for test. After making sure the machine is the best performance, then ship out the machine.

After-sale service：

1.The whole machine warranty is 2 years, laser source warranty is 3 years.

2.Electrical parts: Switching power supply, AC contactor, Switch button. If have quality problem in within 2 years，we sent to you a new one and free.

3.Motherboard and galvanometer have quality problems, We will send the new one to you , But the customer needs to return the old part to us.

4.If the laser source have quality problems, we can repair it for free

Note : The above warranty terms are limited to nonhuman quality problems.